Built for the places off-the-shelf can't go.
Purpose-built sensors, gateways and edge devices.
Purpose-built IoT hardware including sensors, gateways and edge devices designed for monitoring in harsh and remote infrastructure environments.
- IP65 / IP67
- -40 to +75 °C
- Open protocols
- OTA firmware
One platform, three devices
One platform. Three purpose-built devices.
Each device is engineered around a specific job in the field, and every one speaks the same protocol, so you can mix, match and scale without integration overhead.
PG-2400 Edge Gateway
The hub. Aggregates field sensors over RS-485, Modbus, BACnet and IP, then forwards to ProDCIM over wired or cellular.
- 2× GbE
- LTE-M
- PoE 48V
- IP65
PS-100 Multi-Probe Sensor
Field instrumentation in a single enclosure: temperature, humidity, CO2, pressure and dew-point, wired or wireless to the gateway.
- 4 channels
- ±0.2°C
- LoRa
- IP67
EC-300 Edge Controller
Local logic at the site. Runs rules even when the link is down: alerts, schedules, fail-safes, and bridges to PLCs and SCADA.
- Modbus
- BACnet
- SCADA
- DIN-rail
From field to platform
Three devices, one data path to ProDCIM.
Every device speaks the same open protocols, so the field topology is plug-and-scale, with no integration overhead.
PS-100 Sensor
Temp · RH · CO₂ · pressure
EC-300 Controller
Local rules · fail-safes
PG-2400 Gateway
Aggregate · normalize · forward
ProDCIM
Monitor · alert · optimize
3
Purpose-built device classes
-40 → +75 °C
Field operating range
IP65 / IP67
Sealed enclosures
7-yr
Parts, firmware & spares
Capabilities
Engineered to outlast the deployment.
Designed in-house by our hardware engineers, with every choice made to survive the field and stay serviceable for years.
Environmentally hardened
IP65/IP67 enclosures, -40°C to +75°C operating range, conformal-coated boards.
Open protocols
Modbus RTU/TCP, BACnet, SNMP, MQTT and OPC-UA, with no proprietary lock-in at the field layer.
OTA firmware
Signed, atomic updates pushed from the platform. Rollback on failure, no truck-rolls.
Secure by design
TLS 1.3, X.509 device identity, secure boot and encrypted credential storage, out of the box.
Flexible power
9–48V DC, PoE-injectable, solar and battery-ready, for cabinets, towers and remote sites.
Resilient connectivity
Wired plus cellular failover, LoRa for distance, store-and-forward when the link is down.
How we build it
Designed, qualified and supported in-house.
From schematic to flashing line, every device is built to survive the field and serviced for years.
1. Design
Schematic and enclosure designed in-house around the specific field job.
2. Qualify
Boards qualified and burn-in tested before they ever ship.
3. Deploy
Field-hardened units drop into cabinets, towers and remote sites.
4. Support
Signed OTA firmware, parts and spares, backed for years.
See it
Built in-house, deployed in the field.
Real Prochista hardware.
Certified & supported
Designed where it's deployed.
Boards are designed, qualified and burn-in tested in-house. Every unit ships with the certifications your inspector and your security team will ask for.
CE · FCC · IC
Region-ready out of the box
SOC 2 Type II · ISO 27001
Aligned controls, audited platform
-40 to +75 °C
IP65 / IP67 enclosures
7-yr support
Parts, firmware and spares
Part of the platform
Better together, on one platform.
Explore at your own pace
Not ready for a demo? Take the next step.
Need hardware for a job off-the-shelf can't do?
Tell us the environment and the signals; we'll design, qualify and support the device.